What’s oil shale?

Since 2008 lots of things have been changing for Oil shale – this article is useful to appreciate (in retrospective) how many, how much.

Pe­ople who owe money have a way of turning the table on their creditors by pointing out that one can’t get blood from a stone. Thanks to the abolition of debtors’ prison, this remains true. You can’t get blood from a stone, sure. But what about oil?
Many oil analysts and researchers believe that we humans have reached the point at which the amount of conventional oil available throughout the world has reached decline. This is called peak oil. Since oil is a nonrenewable resource, the supply is limited. Not everyone agrees that we’ve reached peak oil yet (some believe it’s a century or more away), and there are even a few researchers debating that new oil technology will catch up before we run out of oil completely [source: CERA].

Since we’ve become so d­ependent on technology that is powered by petroleum products — from the gas that runs your car to life-saving pharmaceuticals — more unconventional sources of crude oil are being investigated. One of the more promising reserves of oil that hasn’t been commercially exploited yet is oil shale. This is essentially oil trapped in solid form within rock.

One hundred million years ago, a wide swathe of sea cut the North American continent into eastern and western portions. As sea levels lowered, this sea receded, leaving in its wake inland seas and lush grasslands. The Tertiary-period organisms that lived and died here became fossilized. As millions of years passed, these remains were subject to high temperatures and gravitational pressure and were converted into petroleum. But the conditions that created liquid petroleum in other areas of the world weren’t quite as strong or long-lasting. These conditions resulted in oil shale. Think of oil shale like liquid crude oil that made it through every stage of development, save the last part that converted it into a liquid. It’s up to energy scientists to finish the process. This is no small feat, though.

Oil Shale Extraction
The process of extracting liquid crude oil from the ground is comparatively simple to extracting oil shale. Pressure from gases trapped in the chamber where oil is present force the crude oil to the surface. After this pressure is alleviated, the more difficult secondary and tertiary phases of oil drilling begin. In some cases, water may be pumped in to loosen compressed oil. Sometimes gasses are introduced to repressurize the oil chamber. And in many cases, the remaining oil is simply left for future drilling with more advanced equipment.
Getting crude oil from rock represents perhaps the most difficult process of extraction. Oil shale must be mined using either underground- or surface-mining methods. After excavation, the oil shale must undergo retorting. This is when the mined rock is exposed to the process of pyrolysis — applying extreme heat without the presence of oxygen to a substance, and producing a chemical change. Between 650 and 700 degrees Fahrenheit, the kerogen — the fossil fuel trapped within — begins to liquefy and separate from the rock [source: Argonne National Laboratory]. The oil-like substance that emerges can be further refined into a synthetic crude oil. When oil shale is mined and retorted above ground, the process is called surface retorting.
The problem is that this process adds two extra steps to the conventional extraction process in which liquid oil is simply pumped from the ground. In addition to mining, there’s also retorting and refining of the kerogen into synthetic crude. Oil shale presents environmental challenges as well. It takes two barrels of water to produce one barrel of oil shale liquid [source: Argonne National Laboratory]. And without cutting-edge water treatment technology, the water discharge from oil shale refining will increase salinity in surrounding water, poisoning the local area [source: RAND].
There’s also the matter of the rocks. Every barrel of oil produced from shale leaves behind about 1.2 to 1.5 tons of rock [source: RAND]. What should be done with this remaining rock? There are certainly projects that require loose rock — like covering ground beneath highway overpasses to discourage homeless settlements. But the demand may not meet the supply if oil shale production is ever conducted on a massive scale.
Royal Dutch Shell Oil Company has come up with an answer to some of the problems with oil shale refining. The company calls it In Situ Conversion Process (ICP) [source: Fortune]. In ICP, the rock remains where it is; it’s never excavated from the site. Instead, holes are drilled into an oil shale reserve, and heaters are lowered into the earth. Over the course of two or more years, the shale is slowly heated and the kerogen seeps out. It’s collected on-site and pumped to the surface. This cuts out the mining aspect, and further reduces costs since there’s no need to transport or dispose of spent rock.
Shell’s design includes a freeze wall — essentially, a barrier around the oil shale site where cooled liquids are pumped into the ground. This freezes any groundwater that may enter the site and keeps harmful byproducts like hydrocarbons from seeping out [source: Argonne National Laboratory].
Because of current obstacles, oil shale hasn’t been commercially produced on a large scale. Simply put, it’s currently more expensive and environmentally harmful than conventional drilling. But as the supply of crude oil diminishes and the price of petroleum rises, oil shale — especially under Shell’s plan — is becoming increasingly attractive.

The Geopolitical Consequences of Oil Shale
In the face of a major oil crisis in the 1970s, the Jimmy Carter administration federally funded oil shale research. But when the price of oil dropped once more, interest in unconventional supplies waned [source: Fortune]. With oil at prices higher than anytime in history — the wholesale price of oil per barrel is predicted to rise as high as $150 per barrel in 2008 — oil shale is attractive once again [source: NPR].
This holds true especially in the United States. The largest oil shale reserve in the world happens to be located in the western part of the country, covering parts of Wyoming, Utah and Colorado. This 17,000-square-mile deposit is called the Green River Formation [source: DOE]. And if crude oil can be produced from oil shale on a large scale, the U.S. could become the leader in unconventional oil reserves.
That’s because the reserves found in the Green River Formation can produce an estimated 1.5 to 1.8 trillion barrels of crude oil [source: RAND]. This is three times more than the oil reserves Saudi Arabia currently holds. This amount could meet the United States’ current oil demands for about 400 years [source: Argonne National Laboratory]. In actuality, this prolonged supply is due to a lesser pace of depletion than conventional reserves and the slower rate at which the kerogen could be extracted from shale. Some estimates place peak production of oil from the U.S.’s shale reserves at 5 million barrels per day at most. This isn’t enough to meet the daily U.S. demand of 21 million barrels, just under 10 million of which are imported [source: Fortune].
But cutting foreign-imported oil by half would go a long way to making the U.S. less oil-dependent. In January 2008, the U.S. imported an average of about 3.8 million barrels per day from Venezuela, Nigeria and Saudi Arabia combined [source: EIA]. While U.S. relations with Saudi Arabia are friendly, the relationship between Venezuela and the United States is rife with tense political friction. And Nigeria is a politically unstable country; its oil supplies are under constant threat from rebel factions. These rebel groups resent foreign oil companies who, the groups claim, give little in compensation for the resources they take from the nation. Commercial oil shale production could protect the U.S. from threats to its energy supply posed by these countries.
Venezuela also demonstrates another aspect of commercial oil shale production in the United States: money, and lots of it. The oil shale deposits in the U.S. are largely situated under lands controlled by the federal government. Other countries, like Venezuela, have state-owned oil conglomerates; perhaps the U.S. will dabble in socialist energy policy in the future. The price is certainly right — Venezuela’s state oil company posted revenues of $10.7 billion in the first three months of 2007. This represented a 10 percent decline in Venezuela’s revenue over the same quarter of 2006 [source: AP]. Similarly, Vietnam’s national PetroVietnam oil company reported earnings of $4.8 billion for the first quarter of 2008 [source: Viet Nam News].
These represent a drop in the bucket compared to the $2.5 trillion the U.S. government collected in taxes in 2007 [source: Tax Policy Center]. Still, every little billion helps.

Josh Clark

Originally published in the Howstuffworks

21 April 2008

  • author's avatar

    By: ONE Team

    ONE is a nonprofit magazine founded in 2014, dedicated to providing unbiased and independent commentary and reporting on energy and environment issues. ONE policy pursues the following principles: accuracy, integrity and transparency.
    Only Natural Energy provides original articles and also a selection of other sources most explanatory posts about climate change, new technologies, policies and strategies in the energy field.

  • author's avatar

    Visit the author’s website

Be the first to comment on "What’s oil shale?"

Leave a comment

Your email address will not be published.